Catalogue > Anchoring > Anchoring

AQUA 4 CALIBRATED

When the base is already superlative


 

The technical standard of European countries which, in recent years, has defined the mechanical and dimensional characteristics of chains for pleasure boat anchors has always indicated the standard of mechanical strength on the basis of a breaking strength of 30 kg per mm2.

Maggigroup® has chosen to elevate the quality base of its standard anchor chains up to a breaking strength of 40 kg per mm2. Thanks to the careful selection of special steels and top-quality manufacturing procedures, the basic Maggigroup® products provide a performance superior to industry standards! Hence the decision has been taken to distinguish the basic range of calibrated Maggigroup® anchor chains by means of the distinctive quality mark AQUA 4.

PLUS FEATURES

• Higher breaking strength resistance than a tradition grade 30 chain with consequent greater safety when anchoring in rough waters, and dimensional specifications in line with existing standards and windlass seats available on the market.

• Greater chain elastic field which translates into a potentially greater capacity of the chain itself thanks to the use of better-quality steels with higher prized-alloy content.

• The higher quality of AQUA 4 compared to a grade 30 chain does not translate into a price disadvantage for the buyer. Maggigroup has chosen not to make its loyal customers pay for the better performance of AQUA 4, which in fact retails at the same price as a traditional chain.

 

TECHNICAL SPECIFICATIONS
Art. code
d
(mm)
P (mm) b (mm) Weight (Kg/m)
Strand (m)
Working Load Limit (Kg)
Standard Tensile Strength Limit (Kg)
Actual Tensile Strength Limit (Kg)
Tol. x II P (Kg)
CAL6ZF25
6 18,5 20 0,8 25 400 1630 2000 +1,5/-0,5
CAL6ZF50 6 18,5 20 0,8 50 400 1630 2000 +1,5/-0,5
CAL6ZF75 6 18,5 20 0,8 75 400 1630 2000 +1,5/-0,5
CAL6ZF10 6 18,5 20 0,8 100 400 1630 2000 +1,5/-0,5
CAL8ZF25 8 24 26 1,4 25 1000 4030 4200 +2,5/-0,5
CAL8ZF50 8 24 26 1,4 50 1000 4030 4200 +2,5/-0,5
CAL8ZF75 8 24 26 1,4 75 1000 4030 4200 +2,5/-0,5
CAL8ZF10 8 24 26 1,4 100 1000 4030 4200 +2,5/-0,5
CAL1028ZF25
10 28 34 2,3 25 1250 5096 6300 +2,5/-0,5
CAL1028ZF50 10 28 34 2,3 50 1250 5096 6300 +2,5/-0,5
CAL1028ZF75 10 28 34 2,3 75 1250 5096 6300 +2,5/-0,5
CAL1028ZF10
10 28 34 2,3 100 1250 5096 6300 +2,5/-0,5
CAL1030ZF25
10 30 35 2,3 25 1250 5096 6300 +2,5/-0,5
CAL1030ZF50
10 30 35 2,3 50 1250 5096 6300 +2,5/-0,5
CAL1030ZF75
10 30 35 2,3 75 1250 5096 6300 +2,5/-0,5
CAL1030ZF10
10 30 35 2,3 100 1250 5096 6300 +2,5/-0,5
CAL12ZF50
12 36 40 3,3 50 1800 n.a. 9000 +2,5/-0,5
CAL12ZF75 12 36 40 3,3 75 1800 n.a. 9000 +2,5/-0,5
CAL12ZF10
12 36 40 3,3 100 1800 n.a. 9000 +2,5/-0,5
CAL13ZF50
13 36 44 3,9 50 2000 8154 12000 +2,5/-0,5
CAL13ZF75 13 36 44 3,9 75 2000 8154 12000 +2,5/-0,5
CAL13ZF100 13 36 44 3,9 100 2000 8154 12000 +2,5/-0,5
CAL14ZF50 14 42 46 4,4 50 2500 10000 12300 +2,5/-0,5
CAL14ZF75 14 42 46 4,4 75 2500 10000 12300 +2,5/-0,5
CAL14ZF10 14 42 46 4,4 100 2500 10000 12300 +2,5/-0,5
CAL16ZF50 16 48 54 6,1 50 3150 16400 16400 +3,8/-1,3
CAL16ZF75 16 48 54 6,1 75 3150 16400 16400 +3,8/-1,3
CAL16ZF10 16 48 54 6,1 100 3150 16400 16400 +3,8/-1,3